Index ⇒ Games Support ⇒ steam slug 2009 error after intro videos

Trouble playing a game? Game not running well? Ask help here.

Moderator: LW Moderator

steam slug 2009 error after intro videos

Postby jambo » Fri May 24, 2019 10:42 pm

http://prntscr.com/nt0shx so i get that error if i skip all intro videos or if i watch intro videos i still get that error is this combability issue i have the no drm english version from 2011 my specs i5 2500k 3.30 ghz gtx 1060 6 gb 16 gigs system ram windows 7 enterprise 64 bit so what to do my c++ installations are fine this is only game which does this one guy on youtube completed this game did not find any fixes from his videos
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post

Re: steam slug 2009 error after intro videos

Postby Terje_P » Thu May 30, 2019 12:44 pm

UPDATED Info based on current findings. Other posts should not be considered to be instructions.
*Installing the legacy driver or the latest removes 8.10.13.
Game will not work with Physx Legacy, will work with PhysX_8.10.13_SystemSoftware https://mega.nz/#!VOwngYSR!DF9R4wFZToAN ... 7JscpOKbb8

Uninstall everything related to physx.

Install PhysX_8.10.13_SystemSoftware.

Keep in mind that installing the latest Physx or Physx legacy again will break it.

I have not found a way to install this version of Physx alongside Physx legacy and latest. My previously mentioned workaround (see second post) did not work as I thought. Tried with an old benchmark (https://www.geeks3d.com/20130308/fluidm ... -download/) and Physx was not properly accelerated.

As it stands I can only confirm that this works on Windows 10 64-bit

Older operating systems may behave differently. Other installed software may cause crashes. It should work on a fresh Windows 10 install with just this game installed and the latest Nvidia driver (without Physx selected during installation) 431.18 as of this writing.

So my recommendation is to uninstall PhysX_8.10.13_SystemSoftware, and install Physx Legacy and Physx latest when you are done playing this game, as other games require those to work.



My system
Windows 10 64-bit 1903 18.922.100
1080
Z97-A
16GB RAM

Some more troubleshooting.
https://forums.geforce.com/default/topi ... x-legacy-/

EDIT

I have now done some troubleshooting and for me the game crashes with anything newer than the 2.8.1 files from Physx 9.12 .

https://mega.nz/#!JaJTRABQ!TeOGO5_VlTB5 ... zmjkMvVB_k

Replace 2.8.1 C:\Program Files (x86)\NVIDIA Corporation\PhysX\Engine with the ones in the above link. Take backup of existing folder in case some other games don't work with it.

Works with Physx Legacy and PhysX 9.19 installed.

I'm not sure if it is properly Physx GPU accelerated now, but at least the game work.

The error I got without replacing the files (9.19 installed).

Code: Select all
Faulting application name: SteamSlug.exe, version: 0.0.0.0, time stamp: 0x4a5c83df
Faulting module name: PhysXCore.dll, version: 2.8.1.57, time stamp: 0x5489d7e2
Exception code: 0xc0000005
Fault offset: 0x0014e58f
Faulting process id: 0x361c
Faulting application start time: 0x01d53195d6a69278
Faulting application path: C:\Program Files (x86)\Openoko Entertainment\SteamSlug\release\SteamSlug.exe
Faulting module path: C:\Program Files (x86)\NVIDIA Corporation\PhysX\Engine\v2.8.1\PhysXCore.dll
Report Id: 758f5d96-66f6-4417-a76e-a9e891dd6883
Faulting package full name:
Faulting package-relative application ID:
Last edited by Terje_P on Wed Jul 03, 2019 12:44 pm, edited 10 times in total.
Terje_P
Super Member
 
Posts: 282
Joined: Sat Dec 29, 2012 4:38 pm
Thanks: 15
Thanked: 174 times in 121 posts

Re: steam slug 2009 error after intro videos

Postby Terje_P » Mon Jun 10, 2019 12:43 am

Outdated info

Found a solution.

Looks like Physx Legacy don't work on this particular title. Uninstall everything related to physx, might require the original installer if you can't uninstall it from add or remove programs. Install the one that came with the game.

Then work your way up again, installing the earliest version of physx first.


Original Physx included in the game PhysX_8.10.13_SystemSoftware:
https://mega.nz/#!VOwngYSR!DF9R4wFZToAN ... 7JscpOKbb8
Legacy Driver 9.12.1031
https://www.nvidia.com/object/physx-9.1 ... river.html
Legacy Driver 9.13.0604
https://www.nvidia.com/object/physx-9.1 ... river.html
Latest 9.19.0218
https://www.nvidia.com/object/physx-9.1 ... river.html

While 9.13 in theory should cover 9.12, i don't think that is really the case.


Spoke to soon, looks like installing the legacy driver or the latest removes 8.10.13.

Alright this seems to work

Uninstall everything related to physx

Install PhysX_8.10.13_SystemSoftware, copy https://mega.nz/#!hfBXmKxA!Lxvfxp4bi67z ... MPwcUaQVqE (Latest physx files) to C:\Program Files (x86)\NVIDIA Corporation\PhysX.

Keep in mind that installing the latest physx again will probably break it.
Checked with a game that required Physx Legacy (Medal of Honor) and a new game Metro Exodus which I believe requires physx. Everything is in order.

EDIT:
No, doesnt work as I thought, just tried a Physx benchmark and the benchmark is not properly accelerated using this method.

So i would advise completing the game while you just have PhysX_8.10.13_SystemSoftware installed, and then installing the latest physx and optionally physx legacy for older games.
Last edited by Terje_P on Mon Jun 24, 2019 10:20 pm, edited 2 times in total.
Terje_P
Super Member
 
Posts: 282
Joined: Sat Dec 29, 2012 4:38 pm
Thanks: 15
Thanked: 174 times in 121 posts

The following user would like to thank Terje_P for this post
Scaryfun

Re: steam slug 2009 error after intro videos

Postby jambo » Sun Jun 16, 2019 11:06 am

does not work i did everything right
still the same error fudge piece of shit game
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post

Re: steam slug 2009 error after intro videos

Postby jambo » Sun Jun 16, 2019 11:09 am

is the issue even related to physx
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post

Re: steam slug 2009 error after intro videos

Postby Terje_P » Sun Jun 16, 2019 11:51 am

Have you tried just having PhysX_8.10.13_SystemSoftware installed? As installing later versions of physx uninstalls it again. Causing the game to crash to desktop again. (See workaround)

Have you tried my gamersgate release which is now on the site? That one includes visual runtime files in the game folder.

Try to install:
https://www.microsoft.com/en-us/downloa ... px?id=3387

Works in a VM too. (VM Ware Workstation Windows 10)

Also works on my laptop with Intel HD graphics running Windows 10.

Works in Windows 7 32bit running in a VM too. Fresh install with just Winrar and Steam Slug installed.
Works in Windows 7 64bit running in a VM too. Fresh install with just Winrar and Steam Slug installed.
Last edited by Terje_P on Mon Jun 17, 2019 3:32 pm, edited 4 times in total.
Terje_P
Super Member
 
Posts: 282
Joined: Sat Dec 29, 2012 4:38 pm
Thanks: 15
Thanked: 174 times in 121 posts

Re: steam slug 2009 error after intro videos

Postby jambo » Sun Jun 16, 2019 4:27 pm

PhysX_8.10.13_SystemSoftware i have only have that installed i installed the vcredist 2005 x86 thing still wont work always gives the same error for me i am not running intel gpu i use my main gpu
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post

Re: steam slug 2009 error after intro videos

Postby Terje_P » Mon Jun 17, 2019 7:38 am

Have you tried installing the game to the C drive? Doubt it will work.

I just dont get why it isnt working unless there is a problem with corrupt system files.

Actually got the same error that OP had in another game now (Tunnel Rats)

I don't know exactly what fixed it, but copying d3d9.dll, libwine.dll and wined3d.dll in the game's executable directory seems to have fixed it


Version 1.7.52
For Windows 2000/XP/Vista/7/8/10

https://fdossena.com/?p=wined3d/index.frag

EDIT:
That just crashes the game and bring back the error OP had as soon as you shoot. There are a lot of different versions though, so one might work. It is a DirectX wrapper, basically takes DirectX games and run them in OpenGL and now Vulkan.
Terje_P
Super Member
 
Posts: 282
Joined: Sat Dec 29, 2012 4:38 pm
Thanks: 15
Thanked: 174 times in 121 posts

Re: steam slug 2009 error after intro videos

Postby jambo » Mon Jun 24, 2019 8:53 pm

so which wrapper i need to get for steam slug to work i would love to play this
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post

Re: steam slug 2009 error after intro videos

Postby Terje_P » Mon Jun 24, 2019 9:05 pm

I have not found a wrapper version that works for this as I didn't need it. You could try updating your DirectX with the version included in the gamergate release.

Run it again and it will overwrite any corrupt files.
Last edited by Terje_P on Mon Jun 24, 2019 9:10 pm, edited 1 time in total.
Terje_P
Super Member
 
Posts: 282
Joined: Sat Dec 29, 2012 4:38 pm
Thanks: 15
Thanked: 174 times in 121 posts

Re: steam slug 2009 error after intro videos

Postby jambo » Mon Jun 24, 2019 9:08 pm

i have latest directx installed i have had it installed forever
jambo
Member
 
Posts: 38
Joined: Sat Jul 11, 2015 1:12 pm
Location: somewhere in this world
Thanks: 0
Thanked: 1 time in 1 post


Return to Games Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron